Castrol Molub-Alloy GM 300S/1000

Description

Castrol Molub-Alloy GM™ Gear oils (Previously called Molub-Alloy™ Gear oils) were developed for the lubrication of

enclosed gears. They are manufactured from the highest quality components that have been carefully selected for their

compatibility with Molub-Alloy GM lubricating solids.

Load carrying capabilities are derived from Molub-Alloy GM's formulation and the proprietary blend of lubricating solids.

The lubricating solids are treated to increase their natural affinity for metal surfaces. Also, they are completely dispersed

to assure effectiveness over the life of the oil.

Rust and oxidation inhibiting characteristics are maximized to afford effective rust protection and long service life.

Application

Molub-Alloy GM gear oils are recommended for spur, helical, herringbone, and straight or spiral bevel gears. They are

especially suited for heavy duty and shock loading where Extreme Pressure (EP) characteristics are required.

They should not be used where gear manufacturers specify the use of non-EP lubricants. For severe worm gear service

where ‘compounded’ gear oils are recommended please refer to Molub-Alloy GM 170w / 680.

Molub-Alloy GM gear oil 300 S / 1000 is especially suited for service in enclosed gears for heavy-duty industry and

mining machinery.

Advantages

Reduced friction, most evident under boundary conditions, is directly attributed to the presence of specially

compounded lubricating solids. This benefit is most pronounced where frequent start-up, slow speeds, and high

and unexpected loads are encountered.

The establishment of a protective layer of Molub-Alloy GM solids provides substantial increase in the working life

of both parts and lubricant. This increases load bearing area which can reduce unit pressures operating

temperatures, and wear.

Realistic energy savings are possible through a reduction in peak power demand during cold start-up.

Seal leakage is greatly reduced. Only compatible base oils that control rubber swelling tendencies are used. The

Molub-Alloy GM solids lubricate and improve seal contact surfaces.

Overall savings are derived from the above and result from less labour and downtime, smoother, more efficient

operation with longer parts life, and extended lubrication cycles