Castrol Inertox Light

Description

CASTROL INERTOX™ are chemically and thermally stable high-temperature greases on a fully synthetic basis. There are

universally applied for long-term lubrication of rolling and sliding bearings especially when exposed to hostile ambient

conditions.

Application

For rolling and sliding bearings with extremely extended relubrication intervals such as in:

film stretching machines

tenter frames for textiles

oven carriages in the ceramics industry

For high-temperature lubrication of rolling and sliding bearings.

Under hostile ambient conditions.

Pumpable in central lubrication systems.

Temperature application range: -25°C to +260°C (at higher operating temperatures adequate ventilation must be

ensured!)

Conditions of Use

CASTROL INERTOX LIGHT, MEDIUM, MEDIUM 150, and HEAVY must not be mixed with other lubricants.

Clean the lubrication surfaces thoroughly with e.g. petroleum ether before application.

Advantages

Excellent thermal stability.

High wear protection and good load carrying capacity.

Good corrosion protection.

Non-flammable.

Inert

CASTROL INERTOX MEDIUM is approved for the application in oxygen fittings.

CASTROL INERTOX MEDIUM is approved for gas devices (DVGW)

Resistant to:

Hot and cold water, oils, oil-in-water emulsions.

Inorganic and organic acids and alkaline solutions.

Solvents based on hydrocarbons, e.g. naptha, benzene, toluol, paraffin etc.

Solvents based on chlorinated hydrocarbons, e.g. trichloroethylene (TRI), perchloroethylene (PER),

dichloromethane (methylene chloride) etc.

Alcohols, ketones (acetone), halogens.

Radioactive radiation (gamma rays)